Quote:
Originally posted by Johnny Stew
I haven't done this, so don't quote me... but I believe you have to connect the audio from an external DVD player, into your computer (you need the right jacks and soundcard for that), and rip it to your hard-drive that way.
Hopefully someone else will explain it better than I can (or correct what I've suggested). 
Perhaps Brian (estranged4life), or John (jwys_soapbox)?
|
to burn DVD to Cd is to use the external output of the DVD player and hook it directly into the input of my TDK dual burner system (I DO NOT use a PC writer for copying because they add noise to frequencies whereas a self-contained burner NEVER has to suffer that fate, Besides a PC writer tends to burn cd's at too fast a speed/rate that can cause errors on a cd-r. Anything over 4X speed is NOT recommended!!!) by using RCA cables/and or digital lines...You should be able to do the same on a PC, Hook the extrenal output from the DVD into the input of the CD writer.
I have to add the separation of tracks by hand on my system using the method I described but at least the disc ends up being burnt DAO (Disc-at-once or rather known as seamless...Meaning no gap between the songs) as opposed to TAO (Track-at-once or rather known as a 2-3 gap between songs...Think of it as stopping a cassette tape after a song has been recorded then adding a new another song afterwards.)
I have made mixes of the Rumours DVD by this method and the results are great!!
Brian j.